Painting sometimes can be stressful especially if you are new in the industry and you get a new project. The first project for an amateur painter has a lot of pressure since the painter seeks to establish herself on the market. In case you are new in painting, and you are stuck on what to do in making your work look professional. Don’t worry we will take you through all tips you need to make your painting work look perfect and make yourself a professional painter.
The following tips if you follow them keenly you will flawlessly execute your painting work, and no one will notice you are an amateur;
Painting is more of a process hence you have to take your time to plan and assemble everything you need in executing your work. You can visit the working site and look at the surfaces you are going to paint early enough to enable you to assemble the tools you need for the work. Different painting surfaces require different painting tools and technics and the earlier you know, the better.
Planning stage will also be crucial in identifying the amount of human labor you need and find the people to work in good time. Ensure that everything you need is available at this stage before you start working.
Upon arrival to your working site make sure that you clean the surfaces before you start painting. Applying the paint on dirt surfaces the work will look shoddy since the color will start chipping off soon and the covers will not look neat. The surfaces that receive a lot of human contacts such as Kitchen, bathroom, and bedroom need proper cleaning before you start painting.
Paint looks beautiful when you apply it on a smooth surface. Your work will also be easy when painting on flat surfaces. Smoothening the walls will not take much of your time and when your goal is to impress the client then make the walls clean after cleaning them. Here are some of the different method you can use to smoothen the surfaces;
Use base coats; for the surfaces with minor faultiness or hairline cracks, the base coat will be the perfect way to smoothen the surface.
Fillers; the minor damages that may be on the surface may hinder you from doing a good painting job, fill the small holes to make the paintbrush run smoothly.
Skim Coats; the walls with the large damaged area will require a plaster coat to hide the real faultiness but for this hire a professional to plaster the walls.
You can use the above methods depending on the status of the surface you are painting.
Splatters and spills are very common in the process of painting even if you are too careful with your work. Protecting the floors from paint spills should be a priority before you start painting the surfaces. In case you notice that any spillage clean immediately before the paint dries which makes it hard to clean the floors.
Paints differ in colors even if they all come from a single manufacturer. You may not realize the difference until you complete painting and the surfaces dry. To be on safe side mix all paint in one clean bucket and stir keenly using a wooden stick. Make sure the paints completely to get a uniform color.
Sand the surface immediately after the drying of the primer coat using a sand sponge to make the smooth for painting. The sanding will ensure that the paint reaches every spot on the surface you are painting, and eventually your work will be fantastic. Use a clean cotton cloth to remove the sand dust and get ready to start painting.
Painting of the trim helps achieve complete smoothness that will make your work look excellent despite being an amateur. The moment the trim get dry immediately tape it and start painting the walls.
You must be careful of the lap marks that occur when painting which mainly appears when you roll a paint that has already started drying. The best way to avoid this problem is to paint small sections at a time and always dip the brush in the paint bucket before rolling the brush. In case the lap marks occur, apply a finish coat to hide them using the above technique.
Surfaces such as tall walls, ceilings or stairwells, use the roller and make sure you roll it in different directions to avoid the lap marks. Rollers make the painting work easy, and a single dip in the paint can paint a large surface. The best technique to use is to roll the painter in various directions without applying a lot of pressure, and it will do the work correctly.
To be a professional painter every time you finish the job, expect some mistakes and be ready to correct them for a compelling finish. The stains may happen accidentally, but you can quickly clean them by rerunning the roller or repainting the section. Make sure the trims have a beautiful finish to complement your work.
Painting is not easy more so if you have not gone through a painting course. However, we have made the work easy through the professional painting tips above that will make you a professional painter. We hope you have enjoyed the reading the painting tips? If you follow them correctly, you will deliver an excellent work just like professional, and next time you will have an easy time since you will have gained the skills you need in painting. Kindly don’t hesitate to leave your comment on what you think about this article and we will appreciate more if you share it with your friends.
How To Clean A Paint Sprayer Gun – Cleaning Tips(Graco & Wagner)16 Jan, 2018
10 Tips To Help First Time Painters Make Their Homes Look Great13 Jan, 2018
7 Common Painting Mistakes and How to Avoid Them08 Dec, 2017
How To Affordably Paint Your Own Car05 Dec, 2017
How To Operate An HVLP Paint Sprayer28 Nov, 2017
How To Paint Your House Exterior with An Airless Paint Sprayer28 Nov, 2017
How To Dispose Of Latex Paint -Tips and Tricks Before Painting28 Nov, 2017
How To Paint Exterior Walls With A Paint Sprayer